Seiko DPU-S445 SERIES Spécifications télécharger pdf (Page 83)

6-38

ESC '!' n Set Print Mode

Code 1BH 21H n

Function Sets a print mode for 1-byte characters.

Each bit of n is used as follows:

Bit Function n=0 n=1

0 Undefined - -

1 Undefined - -

2 Undefined - -

3 Emphasized printing Canceled Set

4 Double printing Canceled Set

5 Double-width Canceled Set

6 Undefined - -

7 Underline Canceled Set

The underline is attached to all character widths, including character right-side spacing.

However, it is not attached when skipped by HT or other commands.

The underline width can also be modified with FS '-'. When the underline width is not specified

by FS '-', default width is set as 1-dot underline.

This command is valid for 2-byte characters, except underlines.

If emphasized printing is canceled, double printing is canceled. If double printing is canceled,

emphasized printing is canceled.

The underline mode can also be selected or canceled by other commands, but the most recently

processed command is effective.

Default n=0 (Cancel emphasized printing mode/double printing mode/double-width printing

mode/underline mode)

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 171 172

Pas de commentaire

Seiko DPU-S445 SERIES Spécifications Page 83