Seiko U590 - TM B/W Dot-matrix Printer Manuel de l'opérateur télécharger pdf (Page 52)

A-4 Dip Switch Setting

Changing the DIP switch settings

If you need to change settings, follow the steps below to make your

changes:

CAUTION:

Turn off the printer while removing the DIP switch cover to

prevent an electric short, which can damage the printer.

1. Make sure the printer is turned off.

2. Remove the screw from the DIP switch cover. Then take off the

DIP switch cover, as shown in the illustration below.

3. Set the switches using a pointed tool, such as tweezers or a

small screwdriver.

4. Replace the DIP switch cover. Then secure it with the screw.

The new settings take effect when you turn on the printer.

DSW1 DSW2

1 2 ... 47 48 49 50 51 52 53 54

Pas de commentaire

Seiko U590 - TM B/W Dot-matrix Printer Manuel de l'opérateur Page 52