● Can be set from 10 seconds up to 99 hours 59 minutes 59 seconds in second increments.
● Count down is repeated unless stopped.
●TIMER SETTING
Press to show the TIMER mode.
Press and hold for 2 seconds to show the TIMER SETTING display. (The hour digits start flashing.)
Press repeatedly to select the digits (flashing) to be adjusted.
Press to set the flashing digits.
Button ¬: With each press, one digit is increased.
Button √: With each press, one digit is decreased.
After all adjustments are completed, press to return to the TIMER mode.
◆In the TIMER SETTING display, the flashing digits move quickly if button "
¬" or "√" is kept pressed.
◆If the watch is left untouched in the TIMER SETTING display with the digits flashing, it will automatically
return to the TIMER mode in 2 to 3 minutes.
◆TIMER cannot be set for a time less than 10 seconds. If a time less than 10 seconds is set and button "
¿"
is pressed to return to the TIMER display, the timer will automatically be set for "00:00'10".
¡
¿
¡
¿
●TIMER OPERATION
Press the button ¡ to show the TIMER mode.
Press the button
¬ or √ for start/stop.
By pressing the button "
¿" when the timer is stopped, it
will be reset to show the time you have set to count down.
*With the key mark lighting state, the button
√ cannot be operated.
◆The preannouncement beep sounds from 3 seconds before time-up. When TIMER has finished counting
down, the warning sound beeps 5 seconds. To stop the preannouncement beep or the time-up beep
manually, press any of
¿∼√ buttons.
In such a case, the function to stop the beep has priority over other functions in any mode. (Excluding the
key mark display state for the button
√.)
◆When the timer time-up beep and the alarm are issued at the same time, the time-up beep of the timer is
given priority.
*When the button operation confirmation sound is set off, the warning sound for the TIMER will not beep.
¬,√
Timer mark
During time-up,
00:00.00" is flashing for
5 seconds.
Stop mark: displayed during
a stop (disappears after reset).
[TM] TIMER mode
AM/PM mark
Current time
SECONDSMINUTES
HOUR
√
√
¬ ¿
¬ ¿
¡
¡
● The alarm can be set to ring on a 24-hour basis.
● At the designated time, the alarm rings for 20 seconds.
●ALARM TIME SETTING
Press to show the ALARM mode.
Press and hold for 2 seconds to show the ALARM SETTING mode.
Press repeatedly to select the digits (flashing)to be adjusted.
Press to set the flashing digits.
Button
¬
: With each press, one digit is increased.
Button
√
: With each press, one digit is decreased.
After all adjustments are completed, press to return to the ALARM mode.
*The alarm mark and "on" marks are displayed and the alarm is automatically engaged.
◆
In the alarm time setting, the flashing digits move quickly if button "
¬
" or "
√
" is kept pressed.
◆
When the time function is displayed in the 24-hour indication, the alarm is also displayed in the 24-hour indication.
◆
When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
◆
If the watch is left untouched in the ALARM SETTING display with the digits flashing, it will automatically return to the
ALARM mode in 2 to 3 minutes.
●ALARM ENGAGEMENT/DISENGAGEMENT
¬
,
√
With each press in the ALARM mode, the alarm is alternately engaged and disengaged
*With the key mark lighting state, the button
√
cannot be operated.
¡
¿
¡
¿
¬,√
◆
When the alarm is set, the beep sounds for about 20seconds at the
designated time. To stop the sound manually, press any of the
buttons. In such a case, the function to stop the beep has priority
over other functions in any mode. (Excluding the key mark
display state for the button
√
.)
◆
When the timer time-up beep and the alarm are issued at the same time, the time-up beep of the timer is given priority.
HOUR
MINUTES
√
¿
¡
¬
Alarm mark
Current time
AM/PM mark
[AL](Alarm) mode
"on"
mark
[
Alarm engaged]
"- -"
mark
[Alarm disengaged]
"on"/" --"(alarm engagement/
disengagement)mark
√
¬
√
¬
Commentaires sur ces manuels