Seiko S651 Manuel d'utilisateur télécharger pdf (Page 21)

—18—

1. Turn off the power.

2.  For the built-in power type printer, connect the AC power cord to the AC inlet, and

insert the plug into an electric outlet.

 For the AC adapter type printer, connect the cable connector of the AC adapter to

the power connector. Next, connect the AC power cord to the AC inlet, and insert

the plug into an electric outlet.

3. SETUP

3.1 Connecting the AC Power Cord

CAUTION

 Use only an AC adapter that complies with the specified ratings.

 Always hold the AC adapter’s cable connector by the connector when removing or inserting

it.

 Use an AC power source that does not also supply power to equipment that

generates electromagnetic noise.

 Pulling on the AC power cord may damage it, cause a fire, electric shock, or break a

wire.

 If a lightning storm is approaching, unplug the AC power cord from the electric outlet.

A lightning strike may cause a fire or electric shock.

 Keep the AC power cord away from heat generating appliances. The insulation on the

AC power cord may melt and cause a fire or electric shock.

 If the printer is not going to be used for a long time, unplug the AC power cord from

the electric outlet.

 Place the AC power cord so that people do not trip on it.

AC inlet

AC power cord

Power connector

AC inlet

AC adapter

AC power cord

Cable connector

Built-in power supply type

AC adapter type

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 57 58

Pas de commentaire

Seiko S651 Manuel d'utilisateur Page 21