—54—
*1: If print data is very dense, the print head is hot, data transmission is slow, or some other conditions, the
motor and printing may occasionally stop which causes white stripes in the printout. To print high-
density data, set MSW2-3 (Spool Print) to ON to reduce striping, although this increases the time before
printing starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
*2: The values for memory switches MSW7-X are only effective when DIP switch no. 1 is set to OFF.
MSW10-4 Old Command
Invalid Invalid, CBM1, CBM2
MSW10-5 Buzzer Event
All Event/
Error
All Event/Error, Not by C.Open, Not by C.Open/PE
MSW10-6 Buzzer Sound
Tone 2 Tone 1, Tone 2, Tone 3, Tone 4
MSW13-1 Security/Target
Low/All Low/All, Mid/All, Mid/Paired only, Hi/All, Hi/Paired
only
MSW13-5 BT Device Scan
Discoverable No Response, Discoverable
MSW13-6 Auto Reconnect
Valid Invalid, Valid
Switch no. Function Initial setting Setting value
Commentaires sur ces manuels