Seiko V-64S Guide de l'utilisateur télécharger pdf (Page 160)

4-12

¢ When returning to the printer after being switched o for less than 2 weeks

(1) Head wash

Clean the Print head and the ink path using the Cleaning liquid.

Prepare the Cleaning liquid cartridge set (IP5-138).

After the head wash, ll 6 color inks.

Note

- To protect the print head and the ink ﬂow path, do not leave the ink container of

the printer empty without re-ﬁlling it with ink or storage liquid.

- Refrain from opening or closing the Front cover or lever while executing the

service clean and head wash. If done so, the operation must be started from the

beginning . Ink and the cleaning liquid will be wasted.

- When leaving the printer for a long time after switched off, the maintenance

differs. In case of more than 2 weeks, the printer is left after ﬁlled with the

storage liquid. In case of less than 2 weeks, leave the printer with inks ﬁlled.

(2) Fill the inks after the head wash

After implementing the head wash, the

printer needs to be lled with 6 color inks.

Select PH.MAIN MENU from the operation

panel and select the ink lling.

Note

- In the ink ﬁlling, an ink of about 100 ml is used. If a cartridge containing less

than 100 ml remaining of ink is inserted, the message prompting to replace the

ink cartridge is displayed. Set the cartridge containing more than 20% remaining

of ink.

To ll the ink, insert the cartridges of 6 color inks.

After lling the inks, leave the printer as is for at 1 hour at least.

Then, implement the nozzle print.

When the lost print occurs on the nozzle print, perform the cleaning [NORMAL

ALL] from PH.REC MENU.

#I NK SYST EM OPT

>C HAR GE IN K S YS

IP-5610取説_E.indb 12 09.4.3 3:15:05 PM

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 232 233

Pas de commentaire

Seiko V-64S Guide de l'utilisateur Page 160