Seiko S651 Manuel d'utilisateur télécharger pdf (Page 23)

—20—

Use a serial interface cable with the connection layout shown below.

]

CAUTION

 Always unplug the AC adapter from the printer before connecting the

printer to a Powered USB interface. Failure to do so may damage the host

PC. For information about installing a Powered USB interface, contact your

Citizen Systems dealer.

 Check the orientation of the Powered USB cable connector before connecting it. Insert it

straight in so that the pins do not bend. Push it in until it clicks.

 When disconnecting the cable, always hold the connector.

 Be careful not to insert the USB interface cable into the cash drawer kick-out

connector.

 To connect more than one printer to a single computer via a USB interface you must change

the serial number of the USB interface.

 Hold the connector of the Ethernet interface cable perpendicular and straight when

connecting or disconnecting it. Doing it at an angle may cause the connector to

misconnect.

CAUTION

Place the interface cable so people do not trip on it.

25-pin - 25-pin cable

PC Printer

Signal

Pin Pin

Signal

RXD 2 2 TXD

TXD 3 3 RXD

DTR 4 4 RTS

SG 5 6 DSR

DSR 6 7 SG

CTS 8 20 DTR

9-pin - 25-pin cable

PC Printer

Signal

Pin Pin

Signal

FG 1 1 FG

TXD 2 2 TXD

RXD 3 3 RXD

CTS 5 4 RTS

DSR 6 6 DSR

SG 7 7 SG

DTR 20 20 DTR

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Seiko S651 Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimantes d'étiquettes Seiko S651